Anti bending connector

The anti bending connector is a key protective tool in the construction of power and communication cable traction, mainly used to connect the traction rope with the cable mesh. It can effectively adjust the bending stress caused by angle changes during the traction process, avoid cable or traction rope breakage and damage at the connection, and is the core equipment for protecting long-distance and high tension traction operations safely.

Core strengths

High strength forging, practical resistance to manufacturing

Made of high-quality alloy steel by integral forging, the key stress bearing parts are subjected to high-frequency quenching treatment, which combines high tensile strength and impact toughness, and can withstand traction tension of several tons without deformation or fracture. Surface hot-dip galvanizing treatment can effectively resist outdoor moisture, salt spray, and dust erosion, and is not easy to rust or age even after long-term use in complex working conditions.

Pulley type structure, resistant to bending and reducing drag

Built in rotatable pulley shaft core, which can freely adjust the direction of force with the change of traction angle, greatly reducing the bending stress at the connection and avoiding fatigue fracture of cables or traction ropes due to hard bending. The pulley structure can also reduce friction during the traction process, improve traction efficiency, and protect the cable skin from wear and tear.

Suitable speed for connection, strong adaptability

Both ends adopt an open hanging hole design, which can be directly connected to traction ropes, mesh covers, rotating connectors and other equipment at a suitable speed, without the need for additional tools to complete assembly. The entire series of models are compatible with traction equipment of different tonnages, meeting the construction needs of transmission lines from low-voltage weak current to high-voltage.

Compact structure, good performance

The overall structure is compact and lightweight, making it easy to operate flexibly in narrow scenarios such as high altitude and towers. The surface is smooth and free of edges and corners, which can avoid scratching cables or construction personnel. It is a necessary protective tool for long-distance cable traction, tension laying and other operations.

Specifications and Selection

We offer a full range of models from 1 ton to 10 tons, corresponding to different rated load ranges. Customers can choose the appropriate model based on traction tension, cable specifications, and construction scenarios to confirm the safe operation effect.

Applicable scenarios

Power Engineering: Installation of High Voltage Transmission Lines and Cable Laying Operations

Communication engineering: Long distance communication optical cable traction, pipeline cable laying

Rail transit: traction of overhead contact wire and laying of signal cables